Dining Table or Taxidermist? by Colin Partridge


Eating game is not everyone’s cup of tea but I suppose like many aspects of life, it’s how things are done that is important. A succulent dish of venison prepared by an expert chef is not out of place in the finest restaurant, while an overdone fillet of beef tastes like leather, so it must be a case of preconceptions overriding our taste buds. I don’t know about you, but I’ve got friends who can really cook game and ‘Blighter’s roast bushpig’ rates up there with one of the best, especially when served with good company and quaffing wine.

Similarly, not everyone appreciates stuffed animals and a lot of women seem to have a strong aversion to the whole idea. The end result is that many hunters proudly take home their spoils and then have to eat it themselves, or hide the ‘poor dead things’ away in the attic to keep the peace.

Over the years, I have seen really well presented trophies that have enhanced the ambiance and atmosphere of a study or bush camp and one day, I had to decide whether to take a bird to the dining table or the taxidermist…

Ring-necked pheasant were introduced to New Zealand during the 1840’s and go under the scientific name of Phasianus colchicus. Not being a Latin scholar, I reckon this probably means ‘Clever bugger’, because in the off-season you see them sunning and preening themselves on the side of the road or in the paddocks. Come opening day however, they instantly become alert, secretive and unbelievably cunning and stay that way till the season ends.

A lot of people here consider them a delicacy and I began thinking I was forever doomed to only appreciate them at great distances, because I had been chasing them around unsuccessfully for a few seasons. Then on one rainy day in May, my luck changed when a friend and I ambushed a cock bird that took off like a red-faced rocket from a small ridge above me. Zipping past from right to left it faltered at my second shot but I had to subdue my self-congratulatory thoughts because it then rallied and headed strongly for a huge patch of gorse way down a steep gully.

Gorse is one of the worst imports this country ever made as it is difficult to control and can quickly choke up vast areas of productive land. It also has an impenetrably vicious armory of thorns, so I gloomily negotiated the steep, slippery decline anticipating a fruitless search, but the day suddenly turned shiny bright when I found that it had fallen dead, just inside the gorse patch. I staggered up out of that donga to stand in the drizzle and admire my first ever ring-necked pheasant. It’s a bit difficult to describe those feelings of elation and remorse but gazing awestruck by its beauty, I decided there and then to forego the gastronomic side of things and have it immortalised and to hell with the cost.

Merv modestly would never admit it, but he was a master taxidermist who worked entirely alone, specialising in bird and wild pig mounts. He would not be rushed when practising his craft, telling you up-front that ‘It will take a while’. The eventual cost and the wait of three and a half months were worth it in the end, because he faithfully followed my request to “Please mount the bird in an alert pose”. In fact to me, it looks like it could take off with a clattering of wings and a hoarse cackle at any moment. Spending some time with Merv in his workshop was fascinating and made me appreciate what an art taxidermy really is. It’s hard to believe that the bedraggled bird I dropped off with him was the same one that emerged from his shed looking like a dazzling jewel. Even my wife was impressed and it now stands in the lounge.

The final product of the taxidermist’s trade belies the messy, finicky and sometimes smelly work that goes into transforming your trophy into something to treasure and rekindle those memories. Apparently, how the animal is treated or handled before it reaches him is very important and Merv at times had to try and make a ‘purse out of a pig’s ear’, so when I asked him what tips he had for ensuring a good quality bird trophy he said “Try not to shoot them too much and get them into a freezer as soon as possible”.

Now that good advice really got me thinking as it also applies to eating gamebirds, because when birds for the pot are ‘shot too much’, they are either pulverised or your guests complain when breaking their expensive dentures on shotgun pellets. It is logical therefore, that preparing birds for the table (or the taxidermist), starts with squeezing the trigger, because how you shoot the birds will affect your meal or mount. Considering myself a minor expert on these matters, I’d like to pass on some tips on the all-important process of shooting gamebirds for the table:-

Every biltong hunter knows that shot placement is vital and that a clean kill using a minimum of shots (preferably only one), results in the most useable meat. Using a rifle of suitable calibre for the quarry plays a big part, because not much of an impala is left over if shot in the shoulder with a .458 soft nose at close range. The same goes for gamefowl, because being hit with too many pellets really spoils the meat – have you ever tried to eat a gamebird that was shot with 8’s at fourteen meters using a full-choked 12 bore? So choose your shot size to suit the bird.

Pattern utilisation is also usually totally overlooked but extremely important and too many wingshooters don’t know what spread and pattern their gun produces with the different size shot available. Do you ever see a biltong hunter going into the veld before taking some practise shots and checking his rifle’s grouping? Shotgunners would do themselves a big favour if they followed suite, but to really get it right, you need to practice a bit more intensively than the rifle shooters have to. What you need is a good supply of large sheets of cardboard, draw a 60cm diameter circle on all of them and then pattern both barrels of your gun, separately on these sheets, at a distance of 15 and 30 metres. For those with very choked bores, another patterning at 40 metres is a good idea. This should be done a number of times with the same make of cartridge and shot size that you plan to use on the chosen gamebird species. Having done this, take very careful note of the diameter of the pattern from each barrel, at each distance.

You must then go to a clay pigeon range and shoot at clay’s, letting them fly out to 15, 30 and 40 metres before pulling the trigger. It does take some practice, but here the idea is keeping the pattern diameter of each barrel in mind and to get the edge of your pattern to break the clay birds. ‘Dusting’ them may look impressive, but is not what you want to achieve because if they were real gamebirds they would then be inedible.

It’s just about now that I imagine anyone reading this will start rolling their eyes or snorting cynically, so I’m going to stop while I’m ahead. It’s just that my own wingshooting skills so often result in relatively few pellets hitting the mark that I’d like to put it down to my deliberate ‘pattern utilisation’, but that’s a fantasy and is being rather economical with the truth! So to redeem this story and to make up for pulling your leg, here’s a guineafowl recipe that takes a while to prepare, but which some of my friends seem to enjoy. It should work well on pheasant too.


Guineafowl Recipe

            Filling:                                                               Pastry:

            2 guineafowl                                                                            250g bacon

            4-6 cloves garlic                                                                      125ml milk

            3 large onions                                                                          125ml cooking oil

            1 can mushrooms                                                                    1 egg

            200ml dry white wine (not more)                                       100g cake flour

            15ml Worcester sauce                                                             10ml baking powder

            10ml mixed herbs                                                                    1 pinch salt

            10ml dried parsley

            10ml tumeric

            5ml curry powder

            2 whole cloves

            salt and pepper to taste

            200ml fresh cream

            1 packet brown onion soup


Joint the birds and then boil until tender. Bone and flake the meat. Shred bacon, chop onions, garlic and fry together until just cooked. Drain mushrooms and stir into bacon mixture together with meat. Add wine and Worcester sauce, herbs, parsley, tumeric, curry, cloves, salt and pepper. Stir until blended. Mix soup powder and cream and stir into meat mixture. Spoon into large casserole dish.

Pastry:- Beat together milk, oil and egg. Add flour, baking powder and salt and beat again until just mixed. Pour this over the top of the meat filling and bake at 180 deg C for 20-25 minutes until golden. Ideally, the birds used in this recipe should be a couple that I have shot (or someone else’s who shoots like me), because that way you’ll have minimum meat damage.

Oh yes, Merv also said my pheasant only had two pellets in its neck, which made his job much easier. He was pleased about that.

Some Very Nice New Used Guns at our New Florida Shop.

Used Guns at Westley Richards USA (1 of 10) William Evans Sidelock 16g cased with accessories.

My visit to Florida was billed as a low key effort so I could sneak over and get to grips with the space we have leased and move on with the remodel and fit out. Having done that quickly the camera was dragged out and put in my hands to take a few shots of some new guns we have just recieved in and will be working on to get up online in the used gun shop.

Used Guns at Westley Richards USA (2 of 10) Very nice E.J. Churchill 25″ .410 game gun with original condition and case.

Used Guns at Westley Richards USA (3 of 10) Needing a little more power here is a 28g E.J. Churchill again in fine condition and cased.

Used Guns at Westley Richards USA (4 of 10) Pair of William Evans Best Quality 12g Sidelock shotguns Made in 1923

Used Guns at Westley Richards USA (5 of 10) Composed pair of Westley Richards 12g SST droplock guns 1916 & 1936 for same family.

Used Guns at Westley Richards USA (6 of 10) James Purdey 12g made in 1926.

Used Guns at Westley Richards USA (7 of 10) An Abercrombie & Fitch 2″ 12g gun

Used Guns at Westley Richards USA (8 of 10)

Finally a few shots of a a very rare Ken Hunt deep carved engraved Purdey which has 2 sets of barrels in 28g and 20g  This gun is new and in unfired condition, cased with accessories. More details to follow later.

Used Guns at Westley Richards USA (9 of 10)

Used Guns at Westley Richards USA (10 of 10)

Westley Richards Agency USA – Moving South to Florida and the Beach.

untitled (17 of 93)

Westley Richards Showroom UKThe Westley Richards Factory Showroom. UK.

20 years ago in 1996, I opened the Westley Richards Agency USA in Springfield, Missouri. Prior to this our ‘brand’ had been handled in USA by various ‘agents’, a practise I was not at all comfortable with. I wanted Westley Richards’ personnel to answer our customers calls, not some ‘semi interested’ party who would pass on valuable customers at their discretion. We established the business in a large old school building, converted for our use with the help of English architect Edward Nash who some 10 years later worked with me on our new factory here in England. Springfield was a superb starting base for us, I remember fun and busy years, our activity in USA grew rapidly in the capable hands of Bob Francis and his team.

Then suddenly our activities in Springfield were ‘curtailed’ in 2005 by the ATF and I was told by them that if I wanted to continue trading in USA as Westley Richards, I should leave Springfield, a point I was not going to argue, although I felt I should. Instead we packed up our operation and in 2006 moved North to Bozeman, Montana where the business continued under the direction of Jim Kilday and in more recent years by his son Kevin.

At the end of June after 10 good years in Montana, I have moved the Westley Richards agency south to Florida. I have no particular reason for doing so, excepting to say, that I was 40 when I opened the agency in the Centre of USA, we have spent a further 10 years as we say in England, ‘Up North’ and at 60 years old, I am now retiring to the beach! The last truck load of our contents left Bozeman last week and our doors in Bozeman will be closed on July 8th.


Gulf Breeze Location Westley Richards

LD McCaa manager at Westley Richards USA      E. Duke ‘LD’ McCaa II the new manager of Westley Richards USA in Florida.

Our new operation in Gulf Breeze, Florida will be headed up and managed by E. Duke ‘LD’ McCaa who has worked with his father Duke McCaa for many years running Gulf Breeze Firearms. Westley Richards has leased 3000 sq ft premises next door to GBF and our remodelling, designed by the same team who decorated our factory showroom in England, is in progress, with the opening in the Fall.

LD brings a huge amount of enthusiasm, knowledge of both firearms and hunting together with impeccable customer service to Westley Richards and we look forward to many years  of growing the business from this location.

I have to take this opportunity to thank Duke McCaa for allowing me to steal his most valuable asset, his son ‘LD’, to manage my operation in USA, something I did with reservation. However, with the ability to move next door to Gulf Breeze Firearms, we all agreed the combined and shared knowledge of the two companies will be good for all and make a fine destination stop for anybody travelling past.

I hope that you will all join me in wishing LD and the new location every success, we look very much forward to your calls and custom.

New details of WR USA

Westley Richards press move notification.